Sorry for not getting back with you sooner. I have been putting in a boat lift and wiring it. I hope this is not a duplicate post I posted earlier and it disappeared.
I normally mount the modules down lower where points and condensers were. I normally have to bend the metal tang for the wire up to get them to fit. But if your flywheel clears them they probably should be o.k. up high.
I noticed in your pics you have replacement coils. The small green and small black wire might have to be reversed to get spark if they are positive grounding coils. Meaning you would put the small green wire to ground and small black wire to the module. If memory serves me correctly you can spin the flywheel using rope clockwise like normal if no spark spin it backwards with rope if spark green and black wire must be reversed to fire clockwise.
The flywheel has to be spun quicker to get spark with modules I use a rope. The spark plug gap I believe is like 5 thousandths less than normal for red atoms but they will fire at normal gap.
Hope you got it going.
Joe
https://SecreLocal.com - - No Verify - Anonymous Adult Dating -
-
This reply was modified 5 years, 4 months ago by
.
-
This reply was modified 5 years, 4 months ago by
-
This reply was modified 5 years, 4 months ago by
-
This reply was modified 5 years, 4 months ago by
