Reply To: Evinrude Zephyr differences

[Buccaneer]

Mumbles wrote:

From an older post here:

If you have to change the prop and drive shaft seals, I just did my 4425 and 4423 Rudes and used SKF 5523 and 4770 seals. They aren’t snap in like the originals but with a bit of adhesive sealer they will work.

Them’s the SKF part numbers! Would have to compare P/N’s between 4423/4425 and Zephyr gearcase seals to see if they will work.

Mumbles, I just looked at the parts diagrams for the 4425 Sportsman
and the 4404 Zephyr, and they do show the same part number for
the prop shaft seal. Good to know, Thanks.

I had an old NOS same style seal in my stash, with the center rib,
but the ID was was too sloppy…….. not sure what model it is for.

Prepare to be boarded!