Reply To: 1956 Evinrude 15 HP Model 15016 con rod

Home › Forum › Ask A Member › 1956 Evinrude 15 HP Model 15016 con rod › Reply To: 1956 Evinrude 15 HP Model 15016 con rod

June 21, 2021 at 9:01 am #240812
Buccaneer
Participant

    US Member

    If you have a old screw driver you could grind a radius on it to match the seal bore,
    and sand any sharp edges off the screw driver. I have an assortment of little
    wood blocks handy for using under my pry bars for leverage.
    Last year I replaced the crank seals on three Big Twins…. opened up the cases
    on all three which made seal replacement “easy”.

    Prepare to be boarded!