Reply To: 1969 4hp Folding Johnson Outboard not circulating

[joesnuffy]

Fleetwin,
I decided to use a brass nipple because I think the jb weld will fuse/adhere to the brass and the block cylinder jacket which I used a razor knife to clean the block cylinder jacket down to the metal and I could scrap some tiny groves in it for the jb weld to fuse/adhere to the brass and aluminum making it very strong. The jb weld wouldn’t adhere to plastic. The hose I used has a very small inside diameter which is about the size of a metal ink pen brass cartridge so it should restrict flow of water very well. The inside diameter is so small I had to drill it out on one end so it would fit over the brass nipple. I will take a pic of it once I start it and make some better pics of how small the inside diameter is I can measure it with a pair of calipers.

Thanks,
Joe

https://SecreLocal.com - - No Verify - Anonymous Adult Dating -