Reply To: JW Running on one cylinder only

Home › Forum › Ask A Member › JW Running on one cylinder only › Reply To: JW Running on one cylinder only

May 17, 2021 at 8:02 pm #238515
JACQUES
Participant

    secondary is 4.55 Kohms (4 thousand + 555 ohms) if you are reading 4.55 ohms coil is bad

    Had identical issue on a non shifting 5hp… drove me nuts….. to this day I am not certain what it was…..

    you have only one option…

    take all known good cyl gear ( points, wire, condenser,plug ) put it in the bad cyl circuit and it should fire

    if ok you have a bad or two bad or three bad components begin swapping

    Joining AOMCI has priviledges 🙂