Reply To: JW Running on one cylinder only

Home › Forum › Ask A Member › JW Running on one cylinder only › Reply To: JW Running on one cylinder only

May 17, 2021 at 4:53 pm #238503
frankr
Participant
    billy-t wrote:

    I just checked the coil I changed out with a multi meter and got the following

    0 ohms across the primary

    and 4.55 ohms across the secondary

    Which should be okay I think?

    Bill

    With this new info, forget what I suggested about the reed.

    Around an Ohm would be normal on the primary, however many multimeters cannot detect such a low reading. I say you probably are ok.