Reply To: JW Running on one cylinder only

[billy-t]

Thanks for the responses.

I did swap out the condenser when I changed out the coil.

At first for spark, I was using the neon in line testers and would get indication of spark on both cylinders, but when I used the spark gap tool I was getting no spark on top and healthy big spark on the bottom.

I will swap out the points and see if I have any luck. Hope it is not what Frank suggested… Though it doesn’t seem to have any spark on the top when running. When running and I ground out the top it keeps running but when I ground out the bottom it dies instantly.

Likely still an ignition issue.

Thanks for your time

Bill