Reply To: Stuck Driveshaft.

Home › Forum › Ask A Member › Stuck Driveshaft. › Reply To: Stuck Driveshaft.

May 12, 2021 at 9:44 pm #238256
JOSEPH BRINCAT
Participant

    US MEMBER PAY BY CHECK

    The option that I always thought to be creative… but the motor has to be runnable. Loosen the powerhead to tower screws and shim one side a bit, like 1/16 ” or so. start the engine. The induced “wiggle’ at the drive shaft joint will work it loose. No personal experience with this , but sure should work.

    Joe B