Reply To: 1957 Evinrude Sportwin 10hp front bearing

Home › Forum › Ask A Member › 1957 Evinrude Sportwin 10hp front bearing › Reply To: 1957 Evinrude Sportwin 10hp front bearing

April 20, 2021 at 10:19 pm #236740
Mike Nazarenko
Participant

    Thanks for your reply, but I didn’t notice any pin in the gear case for the front bearing only a hole when I took it out, nor is there a pin shown on the gear case parts diagram. I certainly could cut a suitable diameter drill bit to the correct length and insert it. Don’t want to gamble when fabricating a pin to size is not difficult. Thoughts on that.

    Thank you.