Reply To: 1979 Johnson 70 Bushings

[Mumbles]

Are you referring to the bushings which insert into the swivel bracket? If so, you are going to have to remove one transom bracket from the boat to get the needed room to insert them. Since you have a hoist, you can support the weight of the motor while the bracket is removed and you shouldn’t have to undo any of the wiring or control cables either. I find removing the port side bracket is easiest but allow yourself some time, especially if your motor has power tilt. Also, if you lift the motor in the upright position, keep your hands and fingers away from the tilt mechanism as it can cause personal injury if it suddenly releases.