Home › Forum › Ask A Member › Evenrude / Elto 1.8hp › Reply To: Evenrude / Elto 1.8hp
Everything is soldered together. Condenser,coil and points all have soldered connections. Testing as is, I get a little discharge from the condenser and every other combination I try comes up 000. I can not find my analog tester. The coil has a plug wire soldered on near the bottom and from one side a wire going to the Points. On the opposite side is a ground coming out and soldered to one of the mounting screws from there it goes back to another soldered connection on the side of the coil. I thought I had a picture on my “stupid” phone but it must have vanished. It is an odd-ball hookup and that is why I would like to get a wiring diagram to check it against.