Reply To: Evinrude Lightwin 3 3806A

[JACQUES]

http://www.leeroysramblings.com/Rebuilding_fuelpump.htm

the most critical issue is putting all the layers back in place … to keep springs and small mushroom pads from flying out of view I just put a dab of crazy glue on the bottom and top of the springs to glue the springs on their base mounting nipples

This keeps the springs vertical and solid same goes for the mushrooms mounted on the springs .. .they stay put 🙂

the rest is orientation before messing with a pump scribe or scratch the side . all parts must line up with scratches or marker track unless you venture to reorient some parts

read this document a few times to understand it correctly and check some utubes …. then read it again 🙂

p.s. the nipples can be reoriented but as they say practice makes perfect .

Joining AOMCI has priviledges 🙂