Reply To: Evinrude Lightwin 3 3806A

[Don]

OK, well I would look for a used one, I might even have one. The thing to be careful about is that although most of these little pumps “look the same”, they are not. You will see a little tab on the plastic housing that says “up”, and must be oriented this way for the pump to work properly. Also, the outlet nipples might be oriented differently also. I will look for one when I get home in a few days. Buying a used on online is a gamble, because it may or may not work, not to mention it might not be the right one for your engine….So, consider buying a used one to be “a gamble”, unless it is returnable.
There are many “knock off” versions of these pumps online for bargain prices. Don’t know if I would trust them, another “gamble”, unless they are returnable. One thing is for sure, do not attempt to disassemble one to “rebuild” it, many are not rebuildable. If you attempt it, be ready for springs/cups to come flying out when you pull it apart. You need to mark the orientation of each piece before pulling it apart…Disassemble it in a clean plastic food storage container, so the pieces won’t go far when them come flying out…D