Reply To: Simplex Cables too short

[DAN UMBARGER]

Bucc, I don’t think you want all that cable below the deck and behind the seat, if you run the cables along the side all the way to the transom and then into the drainwell area along the bottom of the drainwell past the engine then they loop around back to the motor. The loop ends up right in front of the motor. Also I always used the measurement from the control box back to the transom over to the centerline then add 3 feet not 4. You also might want to add only 2 feet for the port cable so you don’t have excess cable in the drainwell.