Reply To: OMC dual line fuel line connector rebuild parts

Home › Forum › Ask A Member › OMC dual line fuel line connector rebuild parts › Reply To: OMC dual line fuel line connector rebuild parts

February 27, 2021 at 9:47 am #232355
RICHARD A. WHITE
Participant

    Lifetime Member

    If memory serves, the hole the we shove the Allen wrench thru “should” be .093 or 3/32 of an inch, I have seen some corroded enough to not allow a 3/32 drill blank to pass, that is why I do not include a 3/32 drill blank, and why a 5/64 Allen wrench that has been cut off is sent with the tool.

    http://www.richardsoutboardtools.com
    classicomctools@gmail.com