Reply To: 1965 Fastwin gear case re-seal

Home › Forum › Ask A Member › 1965 Fastwin gear case re-seal › Reply To: 1965 Fastwin gear case re-seal

February 6, 2021 at 9:47 am #229652
Buccaneer
Participant

    US Member

    If you’re doing a complete tear down of the lower unit, I’ve had
    luck using a Dremel with a little stone to weaken the wall of the
    seal (after the rubber top is ripped off), then cave in the seal wall
    with a little chisel, etc. If you’re lucky, you won’t leave a scratch
    on the housing the seal is in.

    Prepare to be boarded!