Reply To: 1956 Scott Atwater 7.5 hp Bail-a-matic impeller install

[Buccaneer]

I got the impeller installed a little while ago.
I used a piece of 1-1/2″ OD thin wall pvc
sink drain. The impeller was a tight fit
inside the pvc, and it took a couple of tries
to get all the vanes bent the same direction.
I was then able to slide the impeller over the
key without much ado.
I’ll have to rig up a bucket of water and do the drill
test soon, before I proceed much further.
Thanks for the help!

Prepare to be boarded!