Reply To: 1956 Scott Atwater 7.5 hp Bail-a-matic impeller install

[wedgie]

I’ve used the pvc pipe on a KG4 impeller. I had to carve outside with a Dremel to fit the cavity.
I’ve used the mini zip tie on an 84 4hp Merc .
Is it possible to line up the impeller with the notch, lift up the driveshaft just enough to drop the pin in?. I might be miscomperstanding. Frank R will know for sure

• This reply was modified 5 years, 9 months ago by wedgie.