Reply To: Evinrude lightwin head gasket

Home › Forum › Ask A Member › Evinrude lightwin head gasket › Reply To: Evinrude lightwin head gasket

January 16, 2021 at 7:55 pm #227948
Mumbles
Participant

    Time for a 1/4 X 20 Heli Coil.

    Or, if you don’t have Heli Coils, a short length of 1/4″ threaded rod can be epoxied into what’s left of the threads and a nut used to tighten the head down. This will only work if there is at least some thread left in the block, otherwise it’s the Heli Coil.