Home › Forum › Ask A Member › 1967 Honda CL-90 A little off Topic Part II › Re: 1967 Honda CL-90 A little off Topic Part II
That brings back memories, That guy has pushrods correct? Ours did & we had no idea how to set them. Tell us more about the parts search & actual build. Looks like a SL model with the swept pipe. I had a 350 SL which was 324cc motor. I ported, polished, added a 450 carbs set & bored to 368cc kit.
It was too hot for the dirt. It would bury a knobby down to the hub in the sand, very fast too as I added 10 teeth to the rear sprocket from I have no idea. Just centered it & welded it to the stock one. Had a ball with it. Oh rejetted doun 3 steps on idle & 2 on the main jet. Back then I would ride on the back wheel as long as the road was good. You bring back great memories getting cacti in the back screaming across the desert. I wore leathers & cheated!!! What fun!!
P.S. did you split the cases too? We would do that to keep the cam chain with no masterlinks.
No, actually this is one is the overhead cam. I believe the trail 90’s of that year were the pushrod motors. They went overhead cam I believe in ’68 or ’69.
Parts search is still pretty easy. Ebay has roughly 100 pages of parts listings. Unfortunately, a lot of parts are only available off shore. It looks like I don’t really have a need for a parts bike, so that is why I’m going to fix it up too. I won’t be spending near as much on it though.
I did split the case and go completely through the bottom end. All new bearings and kickstarter return spring inside, plus new alternator and all new ignition components.