Reply To: Qd 14

Home › Forum › Ask A Member › Qd 14 › Reply To: Qd 14

December 27, 2020 at 4:46 pm #226084
JACQUES
Participant

    no… the just start to open cam marker should hit the roller (cam follower) much earlier see the marker on a 5.5 just to the right of the roller about 1 inch from the edge

    but…. that cam is reversed from conventional cams …mine is narrow on the right yours is narrow on the left… so that said look at the small mark left of the pencil in the narrower portion of the cam edge itself

    IMG_0112

    IMG_0112-1

    Joining AOMCI has priviledges 🙂

    • This reply was modified 5 years, 10 months ago by JACQUES.
    • This reply was modified 5 years, 10 months ago by JACQUES.
    • This reply was modified 5 years, 10 months ago by JACQUES.
    • This reply was modified 5 years, 10 months ago by JACQUES.
    • This reply was modified 5 years, 10 months ago by Mumbles.
    • This reply was modified 5 years, 10 months ago by JACQUES.