Reply To: Evinrude 10hp mag plate

[Marion Hansen]

An approach might be as follows: 1a Clean casting threads with acetone (fingernail polish remover) or lacquer thinner, 1 Take the appropriate screw and coat thread of screw with silicone spray, 2 Lightly remove excess silicone from screw threads, 3 Install silicone-coated screw making sure no excess silicone scraps onto the threads of the broken casting, 4 Make boss of JB weld around the threaded screw and the threads of the casting, 5 What of cure of JB weld.