Home › Forum › Ask A Member › Caille Neptune Gas Tank Repair? › Reply To: Caille Neptune Gas Tank Repair?
Buc, I would do the bottom to the sides complete, all soldered and then attach , rivet and solder the brass pieces. When you say “crimp” , if you mean the inner “s” bend, I did not crimp any of those joints before soldering, however I suppose that it might be a good thing while you can access them on the bottom panel.
Your work is looking very good…
Gas cap>>> the raised “blade” is the correct style.
Joe B
Joe, with the way you suggest, I could do some soldering inside the tank
as well to increase my odds of no leaks. Yes, by crimping I meant
tightening the joints up mechanically before soldering, hammering
the small “fold”, locking the side panel tighter.
Maybe I’ll start on a gas cap tomorrow if I have some round stock
the correct size.
Thanks!
Prepare to be boarded!