Reply To: 1960’s 18 Hp Evinrude

Home › Forum › Ask A Member › 1960’s 18 Hp Evinrude › Reply To: 1960’s 18 Hp Evinrude

November 18, 2020 at 6:12 pm #221163
Buccaneer
Participant

    US Member

    Evinrude25……. good method to tighten up the mag plate, but I tend to “punch mark”
    the plate a little more than needed, and end up sanding as you say.
    Much easier to start with very light punches and check it!

    Prepare to be boarded!