Reply To: Disapointed.Bombardier ignition points need advice

Home › Forum › Ask A Member › Disapointed.Bombardier ignition points need advice › Reply To: Disapointed.Bombardier ignition points need advice

November 15, 2020 at 3:07 pm #220899
rudderless
Participant

    I use a sharpening stone for edged tools. Start with coarse and move to fine. Use oil on the stone. One point flat and the other convex.

    I just replaced mine on a 76′ 15hp. Had to drag a strip of 600 paper between the rubbing block and the cam on one set as the block was not square with the cam. They were NOS.