Home › Forum › Ask A Member › 1956 Evinrude Fleetwin 7.5hp Crank Play › Reply To: 1956 Evinrude Fleetwin 7.5hp Crank Play
November 12, 2020 at 7:11 pm
#220704
Thanks for the feedback everyone! I’ll go ahead with trying to get this one running. My items on the list are:
#1. Carb cleaning / rebuild
#2. Full ignition rebuild – points, coil, condenser and set the timing. <– I got the timing tool and coil ring from Richard. Thanks!
#3. Water pump impeller
#4. Pull the exhaust plate and check for blockages and pin holes in the plate.
#5. New head gasket & clean out water jackets.
#6. Pressure test the lower unit
Is there anything else I should look at while I’m in the motor? Any issues these motors are famous for?