Reply To: Replace Lower Crank Seal on 1957 Johnson 35HP?

[Bob Wight]

As Frank noted, you will also have to change the lower crank bearing for this swap. You can find all of these parts at Marineengine.com or search on Ebay for NOS or used parts. You should probably try to find a new crank bearing but a used carbon seal, spring, washers, retaining clip should be OK, but install a new quad ring in the carbon seal.

Bob

1937 Champion D2C Deluxe Lite Twin
1954 Johnson CD-11
1955 Johnson QD-16
1957 Evinrude Fastwin 18
1957 Evinrude 3022
1958 Johnson QD-19
1958 Johnson FD-12
1959 Johnson QD-20
1982 Evinrude 25hp

“Every 20 minute job is only a broken bolt away from a 3-day project.”
"Every time you remove a broken or seized bolt an angel gets his wings."