Reply To: Evinrude 10 HP 1957 Model 10014

Home › Forum › Ask A Member › Evinrude 10 HP 1957 Model 10014 › Reply To: Evinrude 10 HP 1957 Model 10014

October 26, 2020 at 2:40 pm #219365
Evinrude 25
Participant

    Yes, I could move the ring by poking at it. It moves back and forth freely. Let me try to fire it up with 70 psi/68 psi of compression. Even I spray more WD-40 on the side of the ring through the intake cover, no improvement on the compression! The top crank shaft seal got leak too. It is time to replace it.