Melgulin , what are the dimensions of the rotor that you are going to make? I looked at this website (McMaster Carr) and found rubber stock. There is multiple thickness and width of the stock as well as noted heat and chemical resistances. Do you know the hardness of the rubber stock you were using?
https://www.mcmaster.com/rubber/=8e3ca64276fc412eb180cca9c3664294kfyb0ixl
Here is a chart with description of the qualities of the materials.
https://www.mcmaster.com/rubber/=dec90930c4ed4c57999c07379edb8dc4kfyb3juj
Which would you recommend?
Cheers,
Cajuncook1
