Reply To: Advice on using OMC gasket sealer.

[Don]

I suspect there is some damage to the housing that the seal sits in if there is still leakage in this area….Are you pressure testing to see the leak, or is it just leaking out on its own? The new seal could be damaged, or the prop shaft might be grooved or gouged. In any event, you will probably end up pulling this apart again, once you have confirmed it is still leaking…
If in fact the housing is damaged causing a leak around the outside of the seal housing. If this is the case, go ahead and use one of the heavier sealers aquasonic described.