Home › Forum › Ask A Member › Neptune Outboard afraid of water › Re: Neptune Outboard afraid of water
April 5, 2015 at 12:36 am
#13354
you can run it longer than 10 seconds, check cylinder temps with your hand, probably get 20 seconds or so. Use that time to get carb set. Mine also with MS88A carb. Do this a few times let it warm up then completely cool down, do it again, until it starts easy every time. As I recall I used about half choke to start and that helped alot…
hope this helps
Richard
http://www.richardsoutboardtools.com
classicomctools@gmail.com