Reply To: Backfire/misfire thru carb

[Beno]

ok.I cannot get the slightest bit of water out of the exhaust port. I can produce about 7psi with just my mouth (9psi of hot air if you ask my girlfriend) and nothing out of the exhaust.

I pulled the little L-hoses to the thermostat and then i can push air/water out of the bottom of the cyl cooling jacket.. but here’s where it gets weird.

if I blow into the little thermostat pipe it comes back out the cylinder hole (yes it does)… and vice versa… That is just WEIRD

I put a heat gun on the thermostat and still get zero water coming out the exhaust …

lost on this one.

also I’ll need a new trigger strategy.. Ive worked the stator over 3400 times and it’s really not getting any better. I noticed there are little copper wires on the other side.. I doubt they can take that kind of repetitive abuse and not break.

I’ll get a picture of the flywheel puller I do have and see if it’s going to work.