Re: Johnson RD-!8 prop pictures

[billy-t]

Okay I am confused. I have a RD-18 1956 at first I tried a prop nut 376731 but that wouldn’t thread on far enough to put the cotter pin through the prop shaft, so I bought a 375773 prop nut and it threads on far enough for the cotter pin to be secured but with the thrust washer 304575 in place there is nothing to keep the drive pin from falling out of the propeller because the prop nut does not go on far enough to cover it and the thrust washer is to big to do anything to retain it.

Not sure what i am missing, sure would appreciate a picture of a prop with nut and thrust washer in place on a RD-18 to have a visual to compare too.

Thanks again.