Reply To: 1948 Gale Hiawatha 5HP

Home › Forum › Ask A Member › 1948 Gale Hiawatha 5HP › Reply To: 1948 Gale Hiawatha 5HP

August 25, 2020 at 1:22 pm #212631
NBD925
Participant

    Can anyone confirm how much water pumps out of the 90 degree bend in the upper portion of the lower unit when you use a drill. I removed the lower unit by removing the two screws and used the drill on the drive shaft. I had my drill set to high.

    I will try to post a video or a link to a video on youtube tonight. I only get water when the drill is at full speed. It does not seem like enough pressure to get all the way up to the head.