Reply To: 1967 Evinrude Lightwin won’t start/run

[mierla]

Thanks, oldcollector – on the second carb, I only went so far as to take the bowl off to check the high-speed jet was clear and look over the float – it was indeed level with the bowl gasket when upside down, but the float needle was missing the little hook-shaped spring, so I put one on.

I guess my next step is to do a more thorough teardown cleaning on the second carb, huh? When I get it apart this evening, I’ll be sure to take some photos to add to this thread.

Thanks again, folks – I very much appreciate your time and insight!