Reply To: Gasket material / ultrasonic cleaner

Home › Forum › Ask A Member › Gasket material / ultrasonic cleaner › Reply To: Gasket material / ultrasonic cleaner

August 18, 2020 at 10:20 pm #212015
JOSEPH BRINCAT
Participant

    US MEMBER PAY BY CHECK

    Lets see if anyone chimes in on the Felpro 3257 material… but if it’s the common fiber/paper stuff I doubt that it will hold up for long in exhaust application, but then on a little 3 HP might be ok. As for serious high temp gasket material the best that I have found is Fel-Pro Pro-Ramic 2499 ( NAPA) . This material has a perforated metal core with layers of high temp fiber bonded to each face. Not easy to cut but tough stuff.

    Joe B