Reply To: Piston orientation ruddertwin

[tinkerman]

Thanks tubs I’ll try tommorow maybe. Sometimes you do SO much to one over a short period of time, you need to just take a break for a day or two or end up getting fed up with it pretty quick. I’ve replaced the flywheel rebuilt the coil and timer replaced a piston ring now tore it BACK down to make sure pistons were in right, I just wanna hear it TRY to start at this point. ONE MORE QUESTION FOR RUDDERTWIN GUYS. when I spin the flywheel by hand (assuming I was sitting in a boat) I hear the click of the timer at about 4 or 5 o’clock.if I’m bouncing it against compression, how does it fire, because this happens at roughly 2 o’clock almost 180 degrees from where it fires. But it DID try to start by doing this (once) how does that work? If I’m not explaining myself clearly let me know

It's a jungle out there.