Home › Forum › Ask A Member › 9.5hp tumbling coughing › Reply To: 9.5hp tumbling coughing

#210306
JACQUES
Participant

    update July 29…Success 🙂

    first thanks everyone for all your comments Fleetwin’s clued me in to the basic problem 🙂 … sorry problems

    Rechecked the throttle plate and it was not shut in the START position as describded in the manual and pic. above 🙁

    I adjusted that section (cam follower) only to find out the tiller throttle START position was all screwed up because the tiller/throtlle gears did not mesh properly.

    After adjusting everything one shot of choke and a pull or two did it…. started right up ok and no more tumbling on the low rpm’s

    and I sold it the next day 🙂

    Joining AOMCI has priviledges 🙂