Reply To: 5.5 low speed mixture control

Home › Forum › Ask A Member › 5.5 low speed mixture control › Reply To: 5.5 low speed mixture control

July 27, 2020 at 5:49 pm #210066
Don
Participant

    US Member

    Yes, the late 50s, early 60s models that used this linkage are a pain…Oftentimes you have to remove the knob on the needle and center it again a few times before you can dial in the adjustment..I guess it is easier to try to adjust the needle with the cover off and the arm removed first, then center it for any fine tuning…