Reply To: ’92 Evinrude 25 HP (lost shroud)

[Don]

OK, this is an electric start engine, correct? Please know that the shrouds are different for the rope start vs electric start engines. The rope start shroud is a bit taller and has a hole for the recoil handle, it will fit on your engine but there will be a big hole where the recoil handle would normally be.
Also, be very careful…The air inlets on these engines have changed over the years…Old engines took in air under the cowl, I think yours takes air in through the tilt handle on the rear of the cover. So, installing an older cover might starve the engine for air even though it will probably fit on OK…