There is a gasket/washer over the nozzle inside the carb – looks like the one in the far left of your first picture. See enclosed picture from my CD-11 carb.
Looks like you have the washer and spring set up correctly behind the carb knob. The spring will actually go behind the front carb plate. See enclosed pic from my CD-11 showing the final installation.
You installed the correct gasket between the carb body and float bowl. It is made of a newer material that is more resistant to modern ethanol fuels.
Edit – welcome to the Forum and hope you join as a full time member.
Bob
1937 Champion D2C Deluxe Lite Twin
1954 Johnson CD-11
1955 Johnson QD-16
1957 Evinrude Fastwin 18
1957 Evinrude 3022
1958 Johnson QD-19
1958 Johnson FD-12
1959 Johnson QD-20
1982 Evinrude 25hp
“Every 20 minute job is only a broken bolt away from a 3-day project.”
"Every time you remove a broken or seized bolt an angel gets his wings."
