Home › Forum › Ask A Member › Recharge Magnets on Fly Wheel › Reply To: Recharge Magnets on Fly Wheel
Tubs:
Oh, come on now, did you REALLY read my article? Look at the data tables……I specifically recorded
the RPM that was needed to produce spark BEFORE and AFTER recharging the magnets. In 2/3 of the
cases, recharging the magnets showed only a small improvement. There was ALWAYS SOME IMPROVEMENT,
but you might need lab equipment (like we used) to measure it.
However, in about 1 out of 5 cases, the improvement was quite large. We sometimes saw outboards go from
over 400 RPM to generate spark, to under 100 RPM……which is a MASSIVE improvement. It’s all there
in the raw lab data we took. In those cases, the motors went from being extremely difficult to start (and would
not idle down at all), to being able to easily start, and idle WAY DOWN to very low RPM.
Read the article again, before you make claims about what we did or did not find.
-wmohat
***********************************************************************
Bill Mohat MS/CIS, BSEET, CCNA
"You can avoid reality, but you cannot avoid the consequences of avoiding reality." --Ayn Rand **********************************************