Home › Forum › Ask A Member › 58 Evinrude 35 Grounding Issue? › Reply To: 58 Evinrude 35 Grounding Issue?
Today was a big day – I squirted a bit of starter fluid into the carb for the first time AND IT RAN!!!!! for a couple seconds, then tried it again, and then one more time. I’ve been wearing a smile ever since. So, my new question – I have the original Cruis-A-Day Hi-Lift Fuel Tank and it appears to be in good, clean condition – no dried gas, etc. Float is good, tube with screen is good. My fuel lines, however, are as old as the hills and need to be replaced. The bulb/primer looks good, but it’s just as old too. I want to replace everything, and with new clamps too. To me, the line looks like 5/16″ ID. Is that correct? I did some research and learned about the new fuel line designations (A1, A2, B1, etc.). Do I want the A1-15 fuel line? Could someone recommend a vender that sells a good quality product (fuel line, bulb, and hose clamps? The two fuel line fittings that clamp to the tank and to the motor look good. I’m not planning on replacing them. Thank you for the continued help. I’m in a much better spot now than I was before joining the AOMC.