Reply To: ’54 Fleetwin – wont run on low speed

Home › Forum › Ask A Member › ’54 Fleetwin – wont run on low speed › Reply To: ’54 Fleetwin – wont run on low speed

June 28, 2020 at 11:10 am #206927
aquasonic
Participant

    Clean up and closely inspect the bearing carrier for cracks in the aluminum casting. The impact of the expanding shock can crack the casting allowing water in and hypoid oil out. If it checks out ok, then it should be reusable. It looks like a new gasket will be needed for the bearing carrier/seal housing.

    Improvise-Adapt-Overcome