Home › Forum › Ask A Member › qd 13 Coil › Reply To: qd 13 Coil
June 22, 2020 at 10:55 am
#206386
There were Sierra coils made for a time that had miserable fitment. The coils themselves were OK electrically….but the laminates were terrible and would require filing etc to make them usable.
If you can return the coils I would suggest that you do so and purchase genuine OMC coils.
As Tubs states….there is a tool that makes alignment a lot easier but even with that tool; if you have the “bad” batch of Sierra product….you may still have to do some filing.
It should not be that hard to get the coils to line up with the bosses on the mag-plate. With or without the tool. It sounds like your Sierra laminates are the culprit.