Reply To: Evinrude Speedifour model 7033

[PM T2]

Three possibilities for where that shredded bearing came from.

Driveshaft bearing that is above the drive pinion
The bronze shaft carrier.
The rear cover

It could also be shim stock that somebody stuck in there to take up clearance, but it might be too thick for shim stock. I can’t really tell from the picture anyway.

If I had to bet, I’d wager that the shaft carrier had a bushing pressed into it and that is what came out and gave you the current situation.

Hope this helps.

Best,
PM T2

He's livin' in his own private Idaho..... I hope to go out quietly in my sleep, like my grand-dad did..... and not screaming, like the passengers in his car...