Re: 1940 Champion Play Boy Lite Twin, 5.5 hp

[hotrod]

It looks like you need a cast aluminum tiller handle and carb knob for high speed adjustment. If your face plate is bent (common), it is best to unscrew the high speed needle completely before removing the face plate, since the plate will be caught on the entrapped needle. Plates are hard to get and should be straightened only enough as needed, in a controlled manner, not with a hammer or by hand. The carb knob (D1F188) is also found on the D1F model. It is a triangular shaped casting. Lucky to have the carb face plate and the rear medallion.