Home › Forum › Ask A Member › Unknown OMC twin identification › Reply To: Unknown OMC twin identification
May 7, 2020 at 2:56 pm
#202385
The model number is stamped into the plate on the tilt bracket. If there are 7 digits, the model number is the first three. If it’s 8 digits, the model number is the first four. The motor is a 4 hp twin, early ’30’s. Check continuity between the two spark plug leads. If it’s in the kilohm range, it’s probably good. We can work out the wiring, it’s pretty simple.
You’ll likely want to bend the fuel line back to where it was so it’s not up against the muffler.
T