you will need this.. read 3 times before starting
scribe the outside edge of the parts on one side this will help you reorient (stack) the parts after
hold down the springs on their resting ” nipple” with a touch of crazy glue same for the little mushroom caps on the springs otherwise they fly away work on a large clean surface
i’ve down a few but…. I like the Chinese pumps .. it is easier
do a blow test after assembly air flows in to out but air does not flow out to in
http://www.leeroysramblings.com/Rebuilding_fuelpump.htm
Joining AOMCI has priviledges 🙂
