Re: Mk 5 & Mk 6 Seals

Home › Forum › Ask A Member › Mk 5 & Mk 6 Seals › Re: Mk 5 & Mk 6 Seals

November 2, 2015 at 2:37 am #26408
DAN ANDERSON
Participant

    US MEMBER PAY BY CHECK

    McMaster Carr shows a .669 X 1" X 3/16" buna N shaft seal that should work. 11/16" is .6675, so that is just .0015 over. I think a single seal was like $8.61. Check that out under ring seals. They have just about everything.

    Dan in TN